Electrically operated
Winch Machine of 50Ton capacity along
with Steel wire
rope, pulley and steel point hook as per
the specification enclosed in Annexure
- I.
Compression Tester for
WDG4 Loco, EMD Part.No: 9572281,One set
consisting of Eight nos. testers,
Commissioning : Firm to supply and
commission the above at DLS/Raipur,
Warranty/Guarantee: As per IRS Conditions
Sliding Surface & Screw
Cutting Lathes ( All gear Head) Model
No.NH26/1500S , Distance between Centre
in mm:1500,swing over bed om mm:600, type
STD with accessories (i). Three jaw self
centering chuck dia in mm (ii). Taper
turning attachment, (iv) a set of change
gear for DP thread. Technical parameters
of the machine should be as per Annexure-
AA (enclosed).
Joint less Hard drawn
Grooved copper contact wire 107 sq.mm
made out of continuous cast copper wire
rods, as per RDSO Specification No.
ETI/OHE/76 (6/97) with A&C slip No. 1,3 &
4 or latest.
SCREW COUPLING ASSY.
for coaching Stock to RDSO Drg..No. SK-
99001 Alt.4 and RDSO Specn. No. C 9505
Rev. Aug. 2001.
(PL_NO:30236095) SCREW COUPLING ASSY.
for coaching Stock to RDSO Drg..No. SK-
99001 Alt.4 and RDSO Specn. No. C 9505
Rev. Aug. 2001.
High Tensile Coupler
Body (Transition type) with welded shank
wear plate as per RDSO Drawing no. SK-
62724, Alt.25, Item No.18 and 10 in
assembled condition, Material and
specification as per drawing.
Cut off angle cock
with vent (for Air Brake Wagons) to
RDSO's Drg. No. WD-88123-S-01, Alt. No. 2
(Two), Item No. 1 to 13 and RDSO's Specn.
No. 02-ABR-02, Appendix-D. Mat. & Spec.
as per drg.
(PL_NO:38163585) Cut off angle cock
with vent (for Air Brake Wagons) to
RDSO's Drg. No. WD-88123-S-01, Alt. No. 2
(Two), Item No. 1 to 13 and RDSO's Specn.
No. 02-ABR-02, Appendix-D. Mat. & Spec.
as per drg.
(PL_NO:38163585) Cut off angle cock
with vent (for Air Brake Wagons) to
RDSO's Drg. No. WD-88123-S-01, Alt. No. 2
(Two), Item No. 1 to 13 and RDSO's Specn.
No. 02-ABR-02, Appendix-D. Mat. & Spec.
as per drg.
Upper Rubber Washer
for Bogie Bolster Suspension to Drg.No.
T-0-5-618/1 ALT `p' and to Specn. No. R-
64/98, Rev.2 of Dec'05.
(PL_NO:30051277) UPPER RUBBER WASHER
for BOGIE BOLSTER SUSPENSION to
DRG.NO.WTAC3-0-5-302/1 ALT. 'j' and to
Specn. No. R-64/98 (Rev.2 of Dec.' 05),
M.S. seamless pipe of
IS: 1239/Pt-1, 2004 (reaffirmed 2010)
with amendment-4 of June 2010 in lengths
of 6 meters 20 mm NB X heavy duty.
Outside diameter max. 27.3 mm, min. 26.5
mm, thickness 3.2 mm. Mass of tube 1.87
Kg/m.plain end. ( Pipe length tolerance
plus minus 5 present is allow. )
M.S. seamless pipe of
IS: 1239/Pt-1, 2004 (reaffirmed 2010)
with amendment-4 of June 2010 in lengths
of 6 meters 20 mm NB X heavy duty.
Outside diameter max. 27.3 mm, min. 26.5
mm, thickness 3.2 mm. Mass of tube 1.87
Kg/m.plain end. ( Pipe length tolerance
plus minus 5 present is allow. )
WIRE STEEL MILD
GALVANISED 1.60 MM DIA,16SWG. IS: 280/78
SOFT, Medium Coating. WIRE STEEL MILD
GALVANISED 1.60 MM DIA,16SWG. IS: 280/78
SOFT, Medium Coating.
LED Flood Light
complete fitting with Lamp 200 watt, as
per Annexure.
(PL_NO:43980168) LED Flood Light
complete fitting with Lamp 200 watt, as
per Annexure.
यह भारतीय रेल के पोर्टल, एक के लिए एक एकल खिड़की सूचना और सेवाओं के लिए उपयोग की जा रही विभिन्न भारतीय रेल संस्थाओं द्वारा प्रदान के उद्देश्य से विकसित की है. इस पोर्टल में सामग्री विभिन्न भारतीय रेल संस्थाओं और विभागों क्रिस, रेल मंत्रालय, भारत सरकार द्वारा बनाए रखा का एक सहयोगात्मक प्रयास का परिणाम है.